Free Electrical Electronic Engineering Project Topics
81. Design And Construct A Power Line Vandalism Monitoring System Using Electronic System Chapter One
DESIGN AND CONSTRUCT A POWER LINE VANDALISM MONITORING SYSTEM USING ELECTRONIC SYSTEM CHAPTER ONE
1.0 INTRODUCTION
This project gives the insight on the design and construction of a transmission power line vandalism detector system. Vandalism means destructive action. It is a hateful and...
82. Design And Construction Of 12v Battery Charger
DESIGN AND CONSTRUCTION OF 12V BATTERY CHARGER
ABSTRACT
This project presents the design and construction of a battery charger. A battery charger is an electrical/electronic device used to put energy into a secondary cell or rechargeable battery by forcing an electric current through it....
83. Design And Construction Of A 3-phasea Automatic Power Change Over With Generator Set Switching Facility
DESIGN AND CONSTRUCTION OF A 3-PHASEA AUTOMATIC POWER CHANGE OVER WITH GENERATOR SET SWITCHING FACILITY
CHAPTER ONE
INTRODUCTION
The evolutionary trend in industrial electronics and automation has engulfed all parts of the world and proved more challenging to as third world like...
84. Design And Construction Of Rf Based Remote Controller For Electric Lamp
DESIGN AND CONSTRUCTION OF RF BASED REMOTE CONTROLLER FOR ELECTRIC LAMP
ABSTRACT
This project work deals on the design and construction of an Rf based remote control for an electronic/electrical device say electric lamp with the aim of switching on/off of the lamp at discretion...
85. Design And Construction Of Automatic Hand Dryer With Temperature Display
DESIGN AND CONSTRUCTION OF AUTOMATIC HAND DRYER WITH TEMPERATURE DISPLAY
ABSTRACT
This project work deals on the design and implementation of an automatic hand-dryer with display capable of drying up a wet hand inserted under its vent and goes off automatically as soon as the ands are...
86. Design And Construction Of Automatic Changeover Switch With Indicator
DESIGN AND CONSTRUCTION OF AUTOMATIC CHANGEOVER SWITCH WITH INDICATOR
ABSTRACT
This project work deals on the design and construction of an automatic power changeover that will change/transfer control from MAINS to Gen set and can switch ON/OFF the Gen automatically. The system integrates...
87. Design And Construction Of A Single Phase Auto-transformer Of Rating Ikva, 240v/110, 80 12v, 6v
DESIGN AND CONSTRUCTION OF A SINGLE PHASE AUTO-TRANSFORMER OF RATING IKVA, 240V/110, 80 12V, 6V
ABSTRACT
This project work-up deals on the design and construction of a single phase step down nations fermor, with raking IKVA, 240V/11OV,...
88. Applications Of Stepper Motors.
APPLICATIONS OF STEPPER MOTORS.
CHAPTER ONE
INTRODUCTION
1.1 BACKGROUND STUDY OF THE PROJECT
A stepper motor is a “digital” version of the electric motor. The rotor moves in discrete steps as commanded, rather than rotating continuously like a...
89. Ac Power Supply Using Solar System
AC POWER SUPPLY USING SOLAR SYSTEM.
CHAPTER ONE
INTRODUCTION
1.1 BACKGROUND OF THE PROJECT
The perspective of this non conventional method of power generation known as solar power must become the primary source of commercial power for everyone in the world to...
90. Design And Construction Of An Alternative Household Power Generating System
DESIGN AND CONSTRUCTION OF AN ALTERNATIVE HOUSEHOLD POWER GENERATING SYSTEM
ABSTRACT
This work presents the design and construction of an alternative household power generating system. The product is about to acquire knowledge on, is all about on how to convert your fuel generator to a fuel...
91. Design And Construct A Portable Microcontroller Based Intelligent Queue Management Systems
CHAPTER ONE
INTRODUCTION
1.1 Background of Study
This chapter gives an overview of thisproject titled a queue management system (microcontroller based intelligent queue management system). This report started with the background of our study to give the readers an idea of...
92. Design And Implementation Of Remote Control Door System
DESIGN AND IMPLEMENTATION OF REMOTE CONTROL DOOR SYSTEM
ABSTRACT
The paper presents a simple design and implementation of a remote control door. It enables the user to control the door using remotefrom approximately10 meters away. The remote transmits a tone using an infrared...
93. Design And Construction Of A Central Wireless Switch That Controls The Entire Appliances A Case Study Of Electrical And Electronic Engineering Esut General Office
DESIGN AND CONSTRUCTION OF A CENTRAL WIRELESS SWITCH THAT CONTROLS THE ENTIRE APPLIANCES A CASE STUDY OF ELECTRICAL AND ELECTRONIC ENGINEERING ESUT GENERAL OFFICE
ABSTRACT
The purpose of this project is to design and construction of a central wireless switch for electrical and...
94. Design And Construction Of An Automatic Change-over Switch With Generator Cut Off And Starter
DESIGN AND CONSTRUCTION OF AN AUTOMATIC CHANGE-OVER SWITCH WITH GENERATOR CUT OFF AND STARTER
CHAPTER ONE
INTRODUCTION
1.1 Background of The project
The increase rate of epileptic...
95. Modelling And Control Of Inductive Power Transfer System
MODELLING AND CONTROL OF INDUCTIVE POWER TRANSFER SYSTEM
CHAPTER ONE
INTRODUCTION
1.1 Background of the Study
Inductive power transmission has become a more and more popular method to deliver power to mobile electronic devices and small appliances with a power consumption of up to 100W...
96. Design And Implementation Of Remote Control Door Opener (lucky)
DESIGN AND IMPLEMENTATION OF REMOTE CONTROL DOOR OPENER
CHAPTER ONE
1.0 INTRODUCTION
1.1 Background of Study
Security describes protection of life and property. There are doors to keep people out, key locks and chains reinforce the mode of security. Doors are being made of metals not just...
97. Transformer Rewinding Machine With Digital
TRANSFORMER REWINDING MACHINE WITH DIGITAL
ABSTRACT
This project is on design and construction of transformer rewinding machine with digital counter. A coil winding machine is a machine for winding coil onto a spool, bobbin and many more. This coil winding machine is one of types of...
98. Design And Construction Of 2kva Step Up Transformer With Input Voltage Regulation And Control Circuit
DESIGN AND CONSTRUCTION OF 2KVA STEP UP TRANSFORMER WITH INPUT VOLTAGE REGULATION AND CONTROL CIRCUIT
ABSTRACT
This seminar research presents a study on transformer installation, operation and maintenance. A transformer is a static electromagnetic device that transfers energy by inductive...
99. Design And Implementation Of Gas Detection System Using Gsm Network
DESIGN AND IMPLEMENTATION OF GAS DETECTION SYSTEM USING GSM NETWORK
ABSTRACT
This project presents the design and implementation of gas detection system using GSM network. Gas leakage is a major problem with industrial sector, residential premises and gas powered vehicles like CNG...
100. Design And Construction Of A Three Phase Authomatic Change Over Switch With Generator Starter And Cut-off
DESIGN AND CONSTRUCTION OF A THREE PHASE AUTHOMATIC CHANGE OVER SWITCH WITH GENERATOR STARTER AND CUT-OFF
ABSTRACT
This project is on design and construction of a three phase automatic changeover switch with generator starter and cut-off....
PREV PAGE [5] NEXT PAGE
Page 5 of 6
Be the First to Share On Social
LATEST PROJECT TOPICS
Problems Of Development Policy-making And Implementation In Obudu Local Overnment Area Of Cross River State Effect Of Indiscipline On Academic Performance Of Students Of Selected Secondary Schools In Irele Local Government Area Of Ondo State Problems Of Indiscipline On Academic Performance Of Secondary School Students In Kosofe Local Government Area Of Lagos State Mass Media On Community Development In Nigeria (a Case Study Of Vandeikya L.g.a, Benue State) Teachers’ Perception On The Use Of Community Resources In The Teaching/learning Of Social Studies In Some Selected Junior Secondary Schools11111