An Investigation Into Quality Of Aggregate In Road Construction

Civil Engineering Project Topics

Get the Complete Project Materials Now! ยป

AN INVESTIGATION INTO QUALITY OF AGGREGATE IN ROAD CONSTRUCTION

ABSTRACT

The current extensive use of low quality aggregate in Nigerian road for engineering applications is of concern because their appear to be a level of ignorance surrounding their existing properties and implications. This project was conceived for the purpose of comparing the crushed aggregate deposits in Isi-Agu Abia State and mac-Daniels Abakiliki. One sample each were obtained from different location mentioned above and transported to ministry of works laboratory Enugu, Enugu State. These two aggregate samples were tested for sieve analysis test, relative density test, water absorption test,  ten percent fine test, aggregate crushing value test (ACV), Aggregate impact value test (AIV), and Abrasion value test. Findings revealed that the best aggregate for road construction is the aggregate from Isi-Agu. It also revealed that the standard strength for Abrasion is between 20 – 30 percent comparison were made between the results, precautions, procedures and observations. And this coarse aggregate should be tested and analyzed before using in any constructional purposes to ensure durability of engineering products.

 

 

TABLE OF CONTENTS

Title page

Approval page

Dedication

Acknowledgements

Abstract

Table of contents

CHAPTER ONE

INTRODUCTION

1.1      Background of the study

1.2      Aim and objectives of this study

1.3      Scope of the study

1.4      Limitation of the study

1.5      Significance of the study

CHAPTER TWO

LITERATURE REVIEW

2.1   Introduction

2.2   Types of aggregates

2.3      Artificial aggregates

2.4      Properties of aggregates

2.5      Classification and sources of aggregates

2.5.1        Classification of aggregate according to size

2.5.2        Classification of aggregates according to geological or petrologically

2.5.3    Classification of aggregate according to particle shape and texture

2.5.4Classification of aggregate according to condition [cleanliness, sandness of aggregates]

2.6      Strength of aggregates

2.6.2Aggregate crushing value (A C V)

2.6.3    Aggregate impact value (A I V)

2.6.4Aggregate abrasion value (A B V)

2.6.5Bulk density

2.6.6Specific gravity

CHAPTER THREE

METHODOLOGY

3.1      Methodology

3.2      Determination of grain size

3.3      Determination of the ten percent fines value

3.4      Determination f aggregate crushing value

3.5      Determination of aggregate impact value

3.6      Determination of aggregate abrasion value

3.7      Determination of relative densities and water absorption

 

CHAPTER FOUR

3.0      Laboratory result

3.1      Result for sieve analysis for (Isi-Agu)

3.2      Result for sieve analysis for (Mac-Daniels Abakiliki)

3.3      Result for ten percent fine value result (Isi-Agu)

3.4      Result for ten percent fine value test (Mac-Daniels Abakiliki

3.5      Result of aggregate impact value (AIV) from Abakiliki

3.6      Result of aggregate impact value (AIV) from Isi-Agu

3.7      Result of aggregate crushing value (ACV)

3.8      Result of aggregate crushing value (AVC) from Isi – Agu

3.9      Result of relative densities and water absorption

3.9.1Result of relative densities (and water) absorption (Isi-Agu)

3.10  Result of relative densities and water absorption (Abakiliki)

3.11  Result of abrasion test from Isi-Agu

CHAPTER FIVE

4.0      Recommendations and conclusion

4.1      Recommendations

4.2      Conclusion

References

 

 

 

CHAPTER ONE

INTRODUCTION

The basic thing in investigation into the quality of aggregate in road construction is that aggregates serves as reinforcement to add strength to the overall composite material. Due to the relatively high hydraulic conductivity value as compared to most soils, aggregates are widely used in drainage application such as foundation and French drains, septic drain fields, retaining wall drains and road side edge drains. Also the quality of aggregates helps to prevent differential setting under the road that binds with more expensive asphalt. Furthermore, aggregates feature at all levels of road construction up to the surface which includes aggregates resistant to polishing, ensuring skid resistance. The quality plan or system should cover all quality aspect of source material handling aggregate processing, stockpiling and transportation including methods and frequency of sampling and testing to be used, and should also identify key responsibilities.

 

1.6      BACKGROUND OF THE STUDY

It involves the analysis of the quality of Aggregates used in road construction in respect to its strength, properties of aggregates and application of aggregates in construction field. Also it explained why Aggregates can be defined as Natural aggregates, manufactured aggregates and Recycled aggregates. It reveals the difference between primary aggregates and secondary aggregates during the study. This study examines the practical uses and laboratory testing of the aggregates using different methods and the problem arising during the research. Also recommendation for developing and implementing a quality plan or system are covered during the research.

 

 

1.7      AIM AND OBJECTIVES OF THIS STUDY

THE GENERAL AIM AND OBJECTIVES OF THIS STUDY IS AS FOLLOWS

1.  To identify the key factors affecting the strength of aggregate structure which are aggregate shape, angularity and texture?

2.  To ensure that the specifications for aggregates angularity are included in the super pave mixture design system.

3.  To obtain a material sufficiently durable to last the design life of the road in order that its performance is not affected by deterioration or degradation of the material.

4.  To determine the aggregate abrasion resistance and breakdown of particles and tests that address aggregate weathering when exposed to freezing and thawing.

5.  To determine the different properties of aggregates

6.  To examine the different quality plan or system to controlling the sources of aggregate

 

1.8      SCOPE OF THE STUDY

It covers the systems and procedures recommended by Roading New Zealand (RNZ) for the quality assurance of aggregates for roads. The guideline was developed by quality Association of New Zealand. It reveals that the aggregate producer should have a formal quality plan system in operation in each quarry detailing the quality control producers to be used for sourcing rock and for controlling quality of each of the aggregate produced. Also the quality plan or system should cover all quality aspects of source material handling aggregate processing, stock pilling and transportation, including methods and frequency of sampling of sampling and testing to be used.

Get Full Work

Report copyright infringement or plagiarism

Be the First to Share On Social



1GB data
1GB data
1GB data
An Investigation Into Quality Of Aggregate In Road Construction

626