DESIGN OF MOLTEN SALT COOLER IN PROCESS PLANT FOR PRODUCTION OF 2-7 X 104 TONNES/YR OF PHTHALIC ANHYDRIDE BY DIRET
Rated 5/5 based on 7,652 reviews
Enugu, Nigeria
Nigeria
Enugu State
Nigeria
09080008483
info@projectng.com
09080008483
info@projectng.com

Design Of Molten Salt Cooler In Process Plant For Production Of 2-7 X 104 Tonnes/yr Of Phthalic Anhydride By Diret

Get the Complete Project Materials Now! ยป

DESIGN OF MOLTEN SALT COOLER IN PROCESS PLANT FOR PRODUCTION OF 2-7 X 104 TONNES/YR OF PHTHALIC ANHYDRIDE BY DIRET

ABSTRACT

 

The general approach to any design of a process plant involve an advanced network of Chemical Engineering processes. This equipment design project was carried out to design a molten salt cooler (heat exchanger) for production of 2.7 x 104 tonnes/year capacity of phthalic anhydride by direct synthesis of gaseous naphthalene.

The information concerning the design of this equipment was gotten from literature review which was then used to obtain the physical properties datas. The material and energy balance calculations were also performed and reviewed as shown in appendix A, B, C and D.

Appropriate sizing of the equipment (cooler) was also done using the physical properties data and proper instrumentation and control analysis was also done.

The cost evaluation of the cooler was also done to determine the present cost of the equipment. The cost of estimation was performed to ascertain the economic viability of the equipment.

At the end a good proper design work was achieved.

TABLE OF CONTENT

 

Cover Page

 

Title Page

 

Letter of Transmittal

 

Approval Page

 

Dedication

 

Acknowledgement

 

Abstract

 

CHAPTER ONE

 

1.0          Introduction

 

1.1       Background of Study

 

1.2       Aim and Objective of Study

 

1.3       Scope of Project

 

1.4       Statement of Problem

 

CHAPTER TWO

 

2.0          Literature Review

 

2.1       Phthalic anhydride Processing

 

2.1.1    Phthalic anhydride and our environment

 

2.1.2    Phthalic Anhydride Uses

 

2.1.3      Physical and Chemical Properties


2.2       Molten Salt

 

2.2.1 Types of Molten Salt

 

2.2.3      Thermophysical Properties of Molten Salt

 

2.2.4      Heat Transfer in Molten Salt

 

2.2.5      Corrosion Chemistry and Material for Molten Salts

 

2.3           Basic Design Procedure and Theory

 

2.3.1 Step of Design Molten Salt Cooler

 

CHAPTER THREE

 

3.1       Material Balance Results

 

3.1.2Aim and Objective of Material Balance 3.1.3Material Balance Summary Tables

CHAPTER FOUR

 

4.1          Energy Balance

 

4.1.1    Introduction of Energy Balance

 

4.1.2      Conservation of Energy

 

4.1.3      Energy Balance Summary Tables

 

 

CHAPTER FIVE

 

5.1                       Design of Molten Salt Cooler


5.1.1Summary of Result for Molten Salt Cooler

 

CHAPTER SIX

 

6.1                       Introduction of Cost Estimation

 

6.2                       Capital Investment

 

6.2.1Fixed and Working Capital

 

6.3                       Direct Production Cost

 

6.3.1 Fixed Cost 6.3.2Variable Cost

 

6.4                       Indirect Production Cost (General Expenses)

 

6.5                       Cost Estimation of Molten Salt Cooler

 

 

 

 

CHAPTER SEVEN

 

7.1       Safety Consideration, Instrumentation and Control

 

7.2       Instrumentation and Control

 

7.2       Typical Control

 

CHAPTER ONE

INTRODUCTION

 

1.1          BACKGROUND OF STUDY

 

Design is the creation of plan or convention for the construction of an object or equipment to solve the human process. It is the process through which the process Engineers or designers generates new ideas, and technology that is capable of solving the societal problem. It is synthesis, the putting together of ideas to achieve the desired goal/objective.

 Design is mainly applied for two primary purpose viz personnel expression and product or process development. The personnel expression is the type of design associated with art, it is divided into concrete and abstract design and it is often a source of beauty and interest. The design for product or process development is when a design serves some useful purpose, such as the shape of a new product or automobile wheel. Design for product or process development involves Aesthetic design, functional design etc.

 

 

Plant design includes all engineering aspects involved in the development of either a new, modified or expanded industrial plant. In this concerned with economic evaluation of new process, designing individual price of equipment for the proposed new venture or developing a plant layout for coordination of overall operation.

 

Engineering process design is one of the processes normally associated with the entire business or enterprises, from receipt of the order or product idea, to maintenance of product at various stages of production cycle. An Engineering Design involves both the process and product.

In this project report, the focus was to design a molten salt cooler for the production of 2.7 x 104 of phthalic an hydride produced in the process plant by direct oxidation of gaseous naphthalene.

 

1.2          AIM AND OBJECTIVE

 

The aim of this project is to design a molten salt cooler that will cool 2.7 x 104 tonnes/year of phthalic anhydride produced by

 

The aim is also to develop a good material and energy balance for a given process.

1.3          SCOPE AND LIMITATIONS

 

The scope and limitation of this project include:

 

1.           Sourcing the data, information from literature relating to the project topic.

 

2.           Performing the energy balance equation

 

3.           Appropriate sizing of the heat exchanger (molten salt cooler)

 

4.           Evaluation of cost analysis of the equipment

 

5.           Preparation of proper instrumentation and control.

 

 

 

 

1.4          STATEMENT OF PROBLEM

 

For proper design of any equipment that can serve better for the production and analysis of a given product, there must be rules and regulation mapped out to ensure that there is safety of life during the process. The failure of the engineers to abide by this rule could result


 

Download Design Of Molten Salt Cooler In Process Plant For Production Of 2-7 X 104 Tonnes/yr Of Phthalic Anhydride By Diret Research Materials

Share On Social