Tunnels are long linear undertakings with few opportunities to perform the work at more thanrnone location. Tunnels are also a series of repetitive operations each of which usually must bernfinished before the next can be started. Tunnel engineering makes possible many vitalrnunderwater and...
This paper investigates the effect of track stiffness variation on the dynamic behavior of a railway passenger vehicle. For the analysis, MBS model of the vehicle and the track was developed using SIMPACK software. Two models are developed, one with constant track stiffness and the other with...
Railway transport system hauls huge commodities and passengers from one location to another.rnThereby, protection of the freight, passenger and the train itself from collisions and hazards is thernpillar of railway system. There have been plenty of methods created to solve train protection...
Railway signaling system is one of the most important parts of the many which make up thernrailway system. It is the vital control system which demands the use of reliable and fault tolerantrnsystem as it directly related to the safe movement of passenger trains. Ensuring safety in...
With increasing focus on economic as well as environmentally friendly means for mass transit, electric rail transport is getting renewed momentum in Ethiopia. The feeding of heavy rolling stock from AC grids cause unacceptable voltage drops, high reactive current, low power factor and asymmetry...
Conventional pneumatic brake systems used in light rail vehicle have several limitations andrndisadvantages such as the response delay in building up the pressure necessary to actuate thernbrakes there is also, the long time delay between front and rear car, wear of braking pad andrnrequirement for...
In this thesis, the main objective is analyzing the overhead line contact wire wear rate using ANSYS Workbench software. The wear is defined as the progressive loss of substances from the operating surface of a body occurring as a result of relative motion at the surface. The simulation of contact...
Light Rail Transit is drawing attention as an environmentally-friendly transportation mode, and is expected to be a solution for sociotechnical transportation issues in many societies. Currently, its market has been rapidly expanding all over the world. In the Ethiopia, the Ethiopian Railway...
Light Rail Transit is drawing attention as an environmentally-friendly transportation mode, and is expected to be a solution for sociotechnical transportation issues in many societies. Currently, its market has been rapidly expanding all over the world. In the Ethiopia, the Ethiopian Railway...
The increasing demands of higher axle loads, speeds and usage means understanding the ballastrnbehavior and its interaction with the infrastructure remains a critical element to the design andrnsuccessful operation of ballasted railway track, Therefore it is important to study the degradationrnof...
In recent years, Railway level crossing (RLC) accidents is one of the major contributing factorsrnof railway related fatality problems in many countries. A fundamental requirement in pedestriansrnsafety planning is the isolation of level crossings along the railway. This is normally assisted...
This paper analyzes the secondary suspension damping influence of a passenger rail vehiclernupon the ride comfort, evaluated via the sterling ride comfort index. The selection of dampingrnratio is a sensitive issue when a too small damping may compromise the vehicle dynamicrnperformance, and a too...
Geometric design is an essential and major component in the design development of railway projects. Geometric alignments (horizontal and vertical) affect project cost and safety significantly keeping other factors constant. The effect of track alignment on cost of awash-weldiya railway project in...
The purpose of this research is to develop a better material for the AA-LRT overhead contact line production. So with this in mind, the mechanical wear and corrosion resistance as well as the conductivity and hardness test of Cu-Ag and three other age-hardened copper alloys (Cu-Sn, Cu-Sn-Cr, and...
Coupler and draft gear package is the most important parts of heavy haul train .In my thesis basic consideration is the structural analysis and rotational behaviour effects of heavy haul train coupler and draft gear .The structural analysis of the coupler and draft gear was analyzed by ANSYS...
A train running along a track is one of the most complicated dynamic and static systems in engineering due to having various nature of contacting wheel and rail. The railway vehicle structures generally have the main components of shells, center sill, under frame, and beams, and behavior of these...
The disc brake is a device for slowing or stopping the rotation of a wheel. Braking of the vehicle leads to heat generation during each braking event. Transient thermal analysis of the Rotor Disc of Disk Brake is aimed at evaluating the performance of ventilated disc brake rotor of a rail vehicle...
Elevated structures are the key element in metropolitan city railways like Addis Ababa’s Light railway Transit. This is because it is much more expensive, controls the system’s capacity and so many more. This Paper which mainly focuses on the comparative analysis of the values of...
Addis Ababa has a pronounced rainfall peak during the summer (July to August).Flooding is a major problem for Addis Ababa city roads. Therefore, the study was carried out to assess the flood risk on Meshualekiya-Gotera corridor due to rainfall intensities of for different years of return...
Wireless Sensor Network (WSN) is an innovative ad-hoc network with distributedrnsensing and processing capacities made up of collection of sensor nodes. The sensorsrntransmit information to the sink. The routing protocols for WSNs are based mostlyrnon efficiency of energy and some deal with...