DESIGN AND CONSTRUCTION OF FIRE ALARM SYSTEM IN A THW STOREYED BUILDING
Title page
Approval page
Dedication
Acknowledgement
1.1 Background of problem
1.2 Structure of the problem
1.3 Objective of the study
1.4 Scope and limitation
1.5 Importance of the study
1.6 Definition of terms
1.7 Design of the system
1.8 Layout for the construction
CHAPTER TWO - CHARACTERISTICS OF THE COMPONENTS
2.1 5a fused, 3 pin pole plug
2.2 Isolation and switching
2.3 A.c. contactors
2.4 The electric bell
2.5 Fire/temperature detectors
2.6 Connectors
2.7 Flexible cord
2.8 Display/control cabinet
2.9 Incandescent lamp
2.10 Lamp holder
3.1 Construction of the display and control unit
3.2 Assemblage of the components
3.3 Problems encountered, during the constructions
4.1 Operation of the unit
4.2 Monitoring/installation
5.1 Fault-finding or trouble-shooting
5.2 Safety precaution
Conclusion
References
Bill of quantity
1.0 INTRODUCTION
1.1 BACKGROUND OF PROBLEM
Fire detection system are safety system. They monitor rooms and buildings continuously for indication of fire outbreak and give alarm directly if one occurs.
Both the British Factory Acts 1961 and the officers shops and railway premises Acts 1963 stiputed minimum requirements in the case of fire that there shall be clear and audible warning throughout the building. Also, an earlier statutory requirement (section 36[7] of the factories Acts 1937) states that in any factory, hospitals, market places, homes etc. Where more than 20 persons are employed that place should be effective provision for giving warning signal in case of fire outbreak and that it shall be clearly audible throughout the building.
1.2 STRUCTURE OF THE PROBLEM
The alarm is given locally (visually and audibly) in order to mobilize internal auxiliary personal e.g the works fire brigade) and inform them as to the seat of the fire. A control center performs the organization of the alarm, that is, it makes available operational aids for the fire fighting measures and automatically bring the fire protection equipment into operation. Fire detection system must be tailored to the geographical and operational conditions in each