Temperature And Water Requirement For

Chemical Engineering Project Topics

Get the Complete Project Materials Now! ยป

TEMPERATURE AND WATER REQUIREMENT FOR

ABSTRACT

 

The production and analysis of “Ngu” extract for temperature and water requirement for leaching of casuistic alkali is the basic objective of this project.  The production was carried out by using unit operations and also using the female inflorescence of a palm fruit (Eleasis Guineesis) as raw material. 

 

The female inflorescence of palm fruit was size reduced from original dimensions to maintain particle size characteristics.  The size reduced bunches were dried at room temperature and at normal atmospheric pressure; after which the sized reduced bunches were burnt at higher temperature.  The cooled ashes were dissolved, filtered by using a sieve of mesh size and the filtered solution is the “Ngu” extract. 

 

The pineapple content of the alkali leached from Ngu ash was potassium hydroxide.  Material and energy balances, equipment sizing with recommended material of construction, costing and profitability analysis was done.  It should however, be noted that a profitable project could be embarked upon if the equipments to be fabricated locally which also reduce foreign exchange being extended on the importation of potassium hydroxide.


TABLE OF CONTENT

Title page

Approval page

Letter of transmittal

Dedication

Acknowledgement

Abstract

Table of content

 

CHAPTER ONE

INTORDUCTION

1.1     Importance of potassium hydroxide

1.2     Objective of the product

 

CHAPTER TWO

LITERATURE SURVEY

2.1     The oil palm tree and its origin

2.2     Verities of the oil palm

2.3     Basic raw materials obtained from the oil palm.

2.4     Factors influencing the rate of extraction

 

CHAPTER THREE

EXPERIMENTAL PROCEDURE

3.1     Leaching of sample

3.2     Determination of alkali (taken as koh) quantity

3.3     Experimental procedure

3.4     Analysis of ngu extract

 

CHAPTER FOUR

EXPERIMENTAL RESULT

 

CHAPTER FIVE

DISCUSSION

 

CHAPTER SIX

CONCLUSION

CHAPTER SEVEN

RECOMMENDATION

 

APPENDICES

REFERENCES

 

CHAPTER ONE

 

INTRODUCTION

 Temperature and water requirement for leaching of caustic alkali from Ngu refers to the extraction of a soluble constituent from a solid by means of a solvent.  The process may be employed either for the production of a concentrated solution of a valuable solid material, or in order to free an insoluble solid from a soluble material with which it is contaminated.

 

The method used for the extraction will be determined by the proportion of soluble constituent present, its distribution throughout the solid, the nature of the solid and the partied size.  The main constituent is usually potassium oxide which often comprises nearly 50% of the total weight of ash.

 

In this project, the major parameters that must be fixed or identified among other are the solvent used, the temperature and the leaching cycle.  The main objective of this research was therefore to identify the suitable temperature and solvent (water) quantity required to give optimum result when alkali, taken as koH, is to be leached from Ngu ash.

IMPORTANCE OF POTASSIUM HYDROXIDE

The need for chemical raw materials for most chemical industries has been on the increase, following the increase in the world population and man’s need for their products.  These chemicals includes those used for diverse production such as production of soap, candle, margarine, plastics and other products.

 

The chemical raw materials includes sodium hydroxide (HaoH), potassium hydroxide (koH), calcium hydroxide (CaCoH2 ), sodium hydrogen trioxocarbonate (iv) among others, industrially, these chemicals are manufactured from various sources and through diverse chemical processes and reactions.  These processes and reactions which these chemicals are produced are usually complex and requires a high cost of production.

          As a result of this production, the prices of the chemicals are not affordable for the average production Engineer and as a result necessities of life as well as the ways of handling or producing them, the chemical engineer whose goal is to mocimize profit and save cost is now faced with many challenges.        

The “Ngu” is locally obtained from the female palm inflorescence of oil palm tree.  The large inflorescence (female) consists of a branched perides of  numerous, unisexual regular flowers.  The panicles which is subtended by a woody branch as sometimes referred to as the spadic.  Usually the flowering occurs set the beginning of the dry season.

 

The “Ngu” as a source of chemical raw materials has not really gained an international recognition as a major source of alkali, as well be discovered I this analysis.  But we are determined to put in our best in this research work with a view to unfolding all the desirable benefits with from Ngu extract, it is true that the uses of Ngu extract for soap production dated back to our forefathers but it was clear that they did not know what they were doing.  Moreover the production processes were very crude obviously resulting to be very poor quality product.

 

Hydroxide of potassium is used in the production of detergents and miscellaneous chemicals which found use in laboratory and industries.  Potassium salts are used in the preparation of fertilizer which makes it essential to plant and animal life.  It is also used in production of glass, gunpowder, and fireworks.

 

OBJECTIVE OF THE PRODUCT

The basic objective of this project is to produce and analysis the “Ngu” solution obtained from palm oil tree with reference to temperature and water requirements.

 

This analysis involves forms of elements contained in Ngu via the female in florescence.  This is done by carrying out quantities and qualitative analysis on the Ngu extract as contained in this project report.   

 

 

 

Get Full Work

Report copyright infringement or plagiarism

Be the First to Share On Social



1GB data
1GB data
1GB data
Temperature And Water Requirement For

1060